海洋效应对中国沿海地磁观测影响——以广州台站为例   总被引：2，自引：1，他引：1       下载免费PDF全文

李建平  翁爱华  李世文  杨悦  唐裕  张艳辉 《地球物理学报》2018,61(2):649-658

以广州台站为例，研究海洋效应对中国沿海地磁观测C-响应的影响.海洋效应的三维正演模拟采用球坐标系下交错网格有限差分方法，假设磁层环形电流源，正演电阻率结构模型采用"地表3-D电导+1-D层状背景"复合模型.数值模拟结果表明，中国地区沿海C-响应受海洋效应影响明显.在空间上，沿海岸线方向，受海洋效应影响，单周期的C-响应由无海洋效应的常值变形为平行于海岸线的等值线密集梯度带；在垂直海岸方向，海洋效应影响向内陆减小，其影响可达哈尔滨-贵阳一线.海洋效应影响采用比值法进行校正，以广州台站为例，在比值曲线上发现海洋效应对C-响应的影响最大周期可达20天左右，并且就中国沿海而言，相对全球平均一维模型，利用中国地区平均一维电导率模型作为背景模型的海洋效应校正结果更加合理.进一步对广州台站海洋效应校正前后的C-响应进行了1-D反演，由于校正前的C-响应在小周期时受海洋效应特别大，直接反演无法拟合数据；但校正后反演拟合明显变好，得到的1-D导电模型表明广州地区上地幔及地幔转换带的电阻率比中国平均电阻率高约一个量级，推测中国华南地区南部的地幔转换带可能处于相对冷的环境，该模型可能成为菲律宾海板块西向俯冲并滞留到华南大陆下方地幔转换带的电性证据.  相似文献   

超慢速扩张环境下超镁铁质岩系统的热液硫化物成矿机理以及启示     

曹红  孙治雷  刘昌岭  姜学钧  何拥军  黄威  尚鲁宁  王利波  张喜林  耿威  施美娟  李东义 《海洋学报》2018,40(4):61-75

西南印度洋63.5°E热液区是在超慢速扩张洋脊发现的首个超镁铁质岩热液系统。对取自该区的热液硫化物样品进行了系统的矿物学和地球化学分析，矿物学分析结果表明:该热液区硫化物为富Fe型高温硫化物，且经历了较深程度的氧化蚀变，大量中间态的Fe氧化物充填在硫化物矿物间的孔隙及内部解理中；这些硫化物相以白铁矿为主，其次是等轴古巴矿和少量铜蓝，缺乏黄铁矿、闪锌矿。据推断，该区的热液成矿作用分为4个阶段:低温白铁矿阶段→高温等轴古巴矿阶段→自形白铁矿阶段→后期海底风化阶段（少量铜蓝以及大量的Fe的羟氧化物）。与之相对应，地球化学分析结果表明这些硫化物的Fe含量较高（31.57%~44.59%），Cu含量次之（0.16%~7.24%），而Zn含量普遍较低（0.01%~0.11%）；微量元素较为富集Co（328×10-6~2 400×10-6）和Mn（48.5×10-6~1 730×10-6）。该区硫化物中较高含量的Fe、Co与超镁铁质岩热液系统相似，明显高于镁铁质岩热液系统。独特的热液硫化物矿物学特征和元素组成可能与该区普遍出露的地幔岩、橄榄岩蛇纹石化作用以及拆离断层的广泛发育的环境有关。  相似文献   

Elastic one-return boundary element method and hybrid elastic thin-slab propagator for strong-contrast media with sharp boundaries          下载免费PDF全文

Zengxi Ge  Yi Luo  Yuyan Ma  Rushan Wu 《地震科学（英文版）》2018,31(2):92-99

In this paper, we developed the theory and algorithm of an elastic one-way boundary element method(BEM) and a corresponding hybrid elastic thin-slab propagator for earth media with sharp boundaries between strong contrast media. This approach can takes the advantage of accurate boundary condition of BEM and completely overcomes the weak contrast limitation of the perturbationtheory based one-way operator approach. The one-way BEM is a smooth boundary approximation, which avoids huge matrix operations in exact full BEM. In addition, the one-way BEM can model the primary-only transmitted and reflected waves and therefore is a valuable tool in elastic imaging and inversion. Through numerical tests for some simple models,we proved the validity and efficiency of the proposed method.  相似文献   

基于背景噪声研究青藏高原东北缘瑞利波相速度和方位各向异性   总被引：2，自引：1，他引：1       下载免费PDF全文

王琼  高原 《地球物理学报》2018,61(7):2760-2775

本研究收集了甘肃、青海、宁夏等118个宽频带数字地震台站的连续波形资料，利用噪声互相关，经过计算和筛选，在5~38 s范围内，共得到5773条瑞利波相速度频散曲线.然后采用1°×1°的网格划分，反演获得青藏高原东北缘相速度和方位各向异性分布.结果表明：短周期8~12 s内，鄂尔多斯从低速异常变为高速异常；该周期范围内各向异性结果与区域断裂走向有很好的一致性.18~25 s周期内，祁连地块、松潘-甘孜地块、羌塘地块低速异常范围逐渐变大，随周期增加地壳低速异常与人工探测结果相符；鄂尔多斯表现为速度随周期增加逐渐变大，说明其中下地壳速度相对偏高，不存在低速异常；该周期范围内的各向异性特征表现为，祁连地块和松潘甘孜地块大致呈NW-SE方向，而青藏高原内部快波方向显示了顺时针旋转的形态.在30~35 s范围内面波速度主要受莫霍面深度和莫霍面附近介质速度的影响，与地壳厚度分布有非常好的吻合.综合不同方法获得的各向异性研究结果，支持印度-欧亚板块的碰撞使青藏高原东北缘地壳发生缩短和逐渐隆升的观点，认为整个岩石圈的垂直缩短变形是青藏高原东北缘的主要形成机制.  相似文献   

Study on the Moment Magnitude of Small and Moderate Earthquakes Located in the Inner Mongolia Region     

Liu Fang  Zhang Fan  Li Bin  Na Re 《中国地震研究》2018,32(1):53-63

Based on digital seismic waveform data from Inner Mongolia Digital Seismic Network, the source spectrum parameters of 182 small and moderate earthquakes from January, 2009 to September, 2016 are derived, and the seismic moment M₀ and moment magnitude M_W of the earthquakes are calculated. The M_L-M_W relationship and the relationship between stress drop and magnitude are obtained using the linear regression method. It is clear that incorporating the moment magnitude into the seismic quick report catalog and the official earthquake catalog can enrich earthquake observation report content, thus providing better service for earthquake emergency and earthquake scientific research.  相似文献   

Using the applied element method for modelling calcium silicate brick masonry subjected to in‐plane cyclic loading     

Daniele Malomo  Rui Pinho  Andrea Penna 《地震工程与结构动力学》2018,47(7):1610-1630

The response of calcium silicate unreinforced masonry construction to horizontal cyclic loading has recently become the focus of experimental and numerical research, given its extensive use in some areas of the world that are now exposed to induced earthquakes (eg, north of the Netherlands). To assess the seismic behaviour of such construction, a relatively wide range of modelling methodologies are available, amongst which the discrete elements approach, which takes into account the intrinsic heterogeneity of a brick‐mortar assembly, can probably be deemed as the most appropriate computational procedure. On the other hand, however, since discrete elements numerical methods are based on a discontinuum domain, often they are not able to model every stage of the structural response adequately, and because of the high computational burden required, the analysis scale should be chosen carefully. The applied element method is a relatively recent addition to the discrete elements family, with a high potential for overcoming the aforementioned limitations or difficulties. Initially conceived to model blast events and concrete structures, its use in the earthquake engineering field is, of late, increasing noticeably. In this paper, the use of the applied element method to model the in‐plane cyclic response of calcium silicate masonry walls is discussed and scrutinised, also through the comparison with experimental results of in‐plane cyclic shear‐compression tests on unreinforced masonry walls.  相似文献   

SIMULATION STUDY OF ROAD-CUT EFFECTS ON SLOPE STABILITY     

CHEN Xiao-li  WANG Ming-ming  ZHANG Ling 《地震地质》2018,40(6):1390-1401

Landslides and rock falls along the highway are common geological hazards in Southwest China. As an influencing factor on potential landslides behavior, roads or distance to roads have been successfully used in landslide susceptibility assessments in mountainous area. However, the relationship between the road-cut and the slope stability is not clear. Therefore, we performed two-dimensional slope stability calculation using the general limit equilibrium (GLE)method incorporated in the software SLOPE/W of GeoStudio for stability analysis of slopes. Our studies show that the man-made roads influence on the slope stability mainly exists in two ways:One is to create a new steep slope, which will result in rock falls and shallow landslides along the roads; the other is to influence the stability of the original slope, which will result in comparatively huge landslides. For the latter, our simulation study reveals that the road location, namely at which part of a natural slope to construct a road is important for the slope stability. For a natural slope with a potential slip surface, if a road is constructed at or near the slope toe where the potential slip surface surpasses, it will greatly degrade the slope's factor of safety (Fs) and make the slope unstable; however, if a rode-cut is near the top of the slope, it will increase the slope's Fs and make the slope more stable. The safety location is different for different slope angle, steeper slope needs a higher location for a safety road-cut in comparison with gentle slopes. Moreover, the slope stability decreases when loading a seismic force and it varies with the slope angle. Firstly, the Fs decreases when the slope angle increasing, and when the slope angle reaches 45°, the Fs then becomes greater with the slope angle increasing.  相似文献   

Precise Location of Earthquakes at the Eastern Boundaries of the Sichuan-Yunnan Rhombic Block     

Fu Ying  Hu Bin  Long Feng  Wang Shiyuan 《中国地震研究》2018,32(4):470-481

Based on the seismic station data sets from Sichuan and Yunnan provinces, we employed a multi-step seismic location method (Hypo2000 + Velest + HypoDD) to precisely locate the 7,787 earthquakes that occurred during 2010-2015 along the eastern boundaries of the Sichuan-Yunnan rhombic block, namely from southern Dawu to the Qiaojia segment. The final results show that location precision is greatly advanced and epicenter distribution exhibits good consistency with the linear distribution of the seismic faults. Earthquake distribution is quite intensive at the intersection region in the southern segment of the Xianshuihe fault, the Anninghe fault zone, the Xiaojinhe fault zone and the Daliangshan fault zone to the east. The depth profile of seismicity shows a clear stepwise activity along the active seismic fault zones. The profile crossing the faults of the Xianshuihe, Anninghe, and Daliangshan presents a complex interaction among faults near the multiple faults intersection region, Shimian, where the earthquakes are obviously divided into two groups in depth. Earthquakes are very rare at the depth of 15km-20km, which is consistent with the region of the plastic rheology between 14km-19km calculated by Zhu Ailan et al.,(2005).  相似文献   

椭圆度-凹坑双缺陷海底管道局部屈曲特性研究   总被引：2，自引：1，他引：1  

薛陆丰  余杨  余建星  徐立新  高静坤  刘浩 《海洋工程》2018,36(2):92-99

海底管道在制造、埋设以及使用过程中极易产生椭圆度-凹坑双缺陷,双缺陷影响管道局部屈曲,对含椭圆度-凹坑双缺陷海底管道的局部屈曲特性研究十分必要。现行规范中采用等效椭圆度对含椭圆度-凹坑海底管道进行评估,该方法无法准确评估不同缺陷形式的屈曲特性。采用形状系数对含椭圆度-凹坑双缺陷的海底管道进行评估,运用有限元软件ABAQUS进行数值模拟,并进行试验验证。在此基础上对含有不同凹坑深度、不同椭圆度的海底管道进行局部屈曲的数值模拟,计算不同形状椭圆度、含有不同凹坑深度海底管道的形状系数,对其进行敏感性分析。计算结果表明:形状系数对海底管道椭圆度、凹坑深度、径厚比敏感性较强;对凹坑宽度敏感性较弱。  相似文献   

高精度直升机机载LiDAR在高速公路改扩建勘测中的应用可行性研究          下载免费PDF全文

郑伟安 《山东国土资源》2018,34(8)

机载LiDAR在公路勘测方面的用途日益广泛。该文对直升机机载LiDAR在高速公路改扩建中的应用技术路线可行性进行了研究论证,从地面控制测量、点云数据获取、点云数据处理、成果应用等多个方面进行了阐述,通过分析LiDAR点云数据在5种不同地面控制点布设方案校正下的点云数据精度,论证了利用地面控制点对直升机机载LiDAR点云数据进行平面和高程校正的可行性。  相似文献